DE250 unroller
Round bale unroller
Load, hitch, unroll !
Simple and tough, the Warzée DE250 unroller distributes round bales of hay and wrapped silage of up to 160 cm and 800 kg quickly. The machine is made up of a back plate with bale spikes and a compact distribution body. This unroller is suitable for front-end loaders, telescopic handlers, and also tractor three-point linkages. Fitted with a straw spreading kit (option), the machine is also capable of spreading round bales of straw.
The most
- Automatic hitching
- Low-profile
- Two-way distribution conveyor
- Only one hydraulic service is required
- Mechanical straw spreading kit (Option)
The machine in action
Configure your DE250 unroller
Any questions ?
Features
Quick hitching
The unroller includes a back plate fitted with bale spikes. The back plate enables the bale to be loaded, and the machine to be hitched and driven without the need for the operator to intervene manually.
Hitching the two bodies mechanically is 100% automatic.
Low-profile
The distribution conveyor is close to the ground, enabling both the bale to be loaded and the machine to be hitched easily, even by a tractor’s three-point linkage.
A multipurpose machine
The unroller is capable of distributing all types of round bale: forage, hay, wrapped silage, haylage, straw, etc.
The conveyor’s ability to revolve in both directions enables damp or compact bales to be distributed.
Straw spreading kit
Each Warzée unroller can be fitted with a mechanical straw spreading kit.
The straw spreading kit does not require any extra hydraulic couplings and it enables straw to be spread up to 7 metres whilst keeping dust levels to a minimum.
Fully customizable
Not only is there the straw spreading kit, but there are also numerous options available that will enable you to create a machine to suit your needs.
Optimised unroller support
As soon as the unroller is lifted, the safety locking hooks become secured.
They attach the body to the back plate in order to allow for the different situations that may occur (long distances, sharp breaking, etc.).
Distribution to the left, to the right and frontal
The machine can be equipped with a second distribution side and/or frontal distribution (options).
The unroller simply has to be hitched to the opposite side in order to change the unrolling direction (left/right/frontal).
Suitable for any type of machine
The unroller is suitable for any type of machine: front-end loader, telescopic handler, tractor three-point linkage, etc.
The back plate with bale spikes is made-to-measure, with suitable brackets fitted.
Available options
Bottom plate
The floor is to be found under the conveyor belt. It enables all of the material to be kept in the unroller and eliminates any losses.
Extension plate
The extension enables the hay and straw being handled to be held in the chamber. It is strongly advised for bales of more than 1.30 m in diameter, the extension stops the material from being lost.
Side plates (1 or 2)
The sides can be put on both sides of the unroller. They enable the bale to be kept in the unroller’s chamber and likewise eliminate any losses.
Both sides distribution (2nd side)
A second side enables distribution to be carried out from both the left and right-hand sides. The automatic hitch enables the change from one side to the other.
Frontal distribution (3rd side)
In addition to the second side distribution, a third side can be mounted on the machine. This option enables frontal distribution and bedding.
Belt Extension
The belt extension increases the lateral offset of the machine, which facilitates the distribution of feed into troughs. However, this option is not compatible with the mulching kit!
Straw spreader kit
Mechanical deflector
Specifications
| Feeding type | |
|---|---|
| Feeding bales | |
| Bedding type | ✗ |
| Bedding bales | |
| Bedding distance | ✗ |
| Bale weight | |
| Hitching/Bale spike | |
| Number of sides | 1, 2 or 3 |
| Locking catches | ✓ |
| Hydraulic motor | ✓ |
| Rotor width | |
| High rotor height | 130cm |
| Trough discharge | |
| Lifting capacity / Loader | |
| Weight | |
| Transmission | Double effect |
| Oil flow | Min. 30 L/min |
| Pressure | Max. 170 bar |
Medias
